Danfoss VLT AutomationDrive FC 301 Instruction Manual

1 Introduction
1.1 Purpose of the Manual
This instruction manual provides information for safe
installation and commissioning of the adjustable frequency
drive.
This instruction manual is intended for use by qualified
personnel.
Read and follow the instruction manual to use the
adjustable frequency drive safely and professionally, and
pay particular attention to the safety instructions and
general warnings. Keep this instruction manual available
with the adjustable frequency drive at all times.
VLT
®
is a registered trademark.
1.2 Additional Resources
Other resources are available to understand advanced
adjustable frequency drive functions and programming.
•
The VLT
®
AutomationDrive FC 302 Programming
Guide provides greater detail on working with
parameters and many application examples.
•
The VLT
®
AutomationDrive FC 302 Design Guide
provides detailed information about capabilities
and functionality to design motor control
systems.
•
Instructions for operation with optional
equipment.
Supplementary publications and manuals are available
from Danfoss. See www.danfoss.com/BusinessAreas/DrivesSo-
lutions/Documentations/VLT+Technical+Documentation.htm
for listings.
1.3
Document and Software Version
This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the document version and the corresponding software
version.
Edition Remarks Software version
MG33APxx Replaces MG33AOxx 7.XX
Table 1.1 Document and Software Version
1.4
Product Overview
1.4.1 Intended Use
The adjustable frequency drive is an electronic motor
controller intended for:
•
Regulation of motor speed in response to system
feedback or to remote commands from external
controllers. A power drive system consists of the
adjustable frequency drive, the motor and
equipment driven by the motor.
•
System and motor status surveillance.
The adjustable frequency drive can also be used for motor
protection.
Depending on the configuration, the adjustable frequency
drive can be used in standalone applications or form part
of a larger appliance or installation.
The adjustable frequency drive is allowed for use in
residential, industrial and commercial environments in
accordance with local laws and standards.
NOTICE!
In a residential environment, this product can cause
radio interference, in which case supplementary
mitigation measures can be required.
Foreseeable misuse
Do not use the adjustable frequency drive in applications
which are non-compliant with specified operating
conditions and environments. Ensure compliance with the
conditions specified in chapter 8 Specifications.
Introduction Instruction Manual
4 Danfoss A/S © Rev. 09/2014 All rights reserved. MG33AP22
1
1

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English