Danfoss VLT AutomationDrive FC 361 Programming Guide

12-11 Link Duration
Range: Function:
Size
related*
[ 0 - 0 ] Read-only. Show the duration of
the present link on each port in
dd:hh:mm:ss.
12-12 Auto Negotiation
Option: Function:
Congure auto negotiation of
Ethernet link parameters, for each
port: ON or OFF.
[0] O Link Speed and Link Duplex can be
congured in parameter 12-13 Link
Speed and parameter 12-14 Link
Duplex.
[1] * On
12-13 Link Speed
Force the link speed for each port in 10 Mbps or 100 Mbps. If
parameter 12-12 Auto Negotiation is set to [1] On, this parameter
is read-only and shows the actual link speed. If no link is present,
[0] None is shown.
Option: Function:
NOTICE
In POWERLINK, this parameter
is locked to 100 Mbps.
[0] * None
[1] 10 Mbps
[2] 100 Mbps
12-14 Link Duplex
Force the duplex for each port to full or half duplex. If
parameter 12-12 Auto Negotiation is set to [1] On, this parameter
is read-only.
Option: Function:
NOTICE
In POWERLINK, this parameter
is locked to half duplex.
[0] Half Duplex
[1] Full Duplex
12-18 Supervisor MAC
Range: Function:
0* [0 -
2147483647 ]
Show the MAC address of currently
active supervisor.
12-19 Supervisor IP Addr.
Range: Function:
0* [0 -
2147483647 ]
Show the IP address of currently
active supervisor.
4.11.3 12-8* Other Ethernet Services
12-80 FTP Server
Enables/disables the built-in FTP server.
Option: Function:
[0] * Disabled Disable the built-in FTP server.
[1] Enabled Enable the built-in FTP server.
12-81 HTTP Server
Enables/disables the built-in HTTP (web) server.
Option: Function:
[0] * Disabled Disable the built-in HTTP (web)
server.
[1] Enabled Enable the built-in HTTP (web)
server.
12-82 SMTP Service
Enables/disables the SMTP (e-mail) service on the option.
Option: Function:
[0] * Disabled Disable the SMTP (e-mail) service
on the option.
[1] Enabled Enable the SMTP (e-mail) service on
the option.
12-83 SNMP Agent
Option: Function:
[0] Disabled Disable the local SNMP agent.
[1] * Enabled Enable the local SNMP agent.
12-84 Address Conict Detection
Option: Function:
[0] Disabled Disable the function which detects
and resolves IP address conicts
with this device in the network.
[1] * Enabled Enable the function which detects
and resolves IP address conicts
with this device in the network.
12-85 ACD Last Conict
Range: Function:
0* [0 -
2147483647 ]
The contested IP address of the
most recent address conict.
12-89 Transparent Socket Channel Port
Range: Function:
Size
related*
[ 0 - 65535 ] Congure the TCP port number for
the transparent socket channel. This
conguration enables FC telegrams
to be sent transparently on
Ethernet via TCP. Default value is
4000, 0 means disabled.
Parameter Descriptions Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 113
4 4

Danfoss VLT AutomationDrive FC 361 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 361
Category	DC Drives
Language	English