Danfoss VLT AutomationDrive Manual

VLT
®
AutomationDrive EtherNet/IP
– H o w t o C o n t r o l t h e F C 3 0 0 –
MG.90.Jx.02 ver. 5
th
September 2007 – VLT is a registered Danfoss trademark 31
Bus Speed Reference Value under Instances 20/70 and 21/71
Master → slave
16 bit
CTW Speed ref. RPM
The speed reference value should be transmitted to the VLT frequency converter in the form of a 16-
bit word. The value is transmitted directly in RPM’s.

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)