Danfoss VLT AutomationDrive Manual

VLT
®
AutomationDrive EtherNet/IP
- P a r a m e t e r s –
MG.90.Jx.02 ver. 5
th
September 2007 – VLT is a registered Danfoss trademark 40
(12-80) FTP Server
Range:
*Disable [0]
Enable [1]
Function:
Enables/disables the build-in FTP server.
(12-81) HTTP Server
Option:
*Disable [0]
Enable [1]
Function:
Enables/disables the build-in HTTP (web)
server.
(12-82) SMTP service
Option:
*Disable [0]
Enable [1]
Function:
Enables/disables the SMTP (e-mail) service on
the option.
(12-89) Transparent Socket Chanel
Port
Range:
0 – 9999
*0
Function:
Configures the TCP port-number for the
transparent socket channel.
This enables FC-telegrams to be sent
transparent on Ethernet via TCP.
Default value is 0, 0 means disabled.

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)