Need help?Do you have a question about the Danfoss VLT FC 360 and is the answer not in the manual?
Guide on manual structure, symbols, and abbreviations.
Glossary of terms related to frequency converters, motors, references, and miscellaneous items.
Essential safety warnings, regulations, and precautions for operation and maintenance.
CE conformity, labelling, and compliance with EMC directives.
Air humidity, aggressive environments, and vibration/shock specifications.
Classification of enclosure types based on frame size and power.
Basic wiring schematic and terminal connections for the frequency converter.
Principles, modes, and internal structures of converter control including VVCplus.
Systems for calculating and handling references for speed control, including limits and scaling.
Configuration, parameters, optimization, and tuning of PID controllers for speed and process.
Information on EMC emissions, test results, and immunity requirements.
Details on Galvanic Isolation (PELV) and Earth Leakage Current.
Overview of brake functions, dynamic braking, and brake resistor selection.
Smart Logic Controller, extreme running conditions, and motor thermal protection.
Overview, network connection, hardware setup, and parameter settings for RS-485.
Overview of FC protocol, Modbus RTU, and network configuration parameters.
Detailed breakdown of FC protocol message structure, fields, and bytes.
Examples of reading/writing parameters and coils using Modbus RTU.
Detailed explanation of Modbus RTU protocol operation and converter communication.
Details on Modbus RTU message structure, fields, and addressing.
Methods for accessing parameters, including data types, storage, and conversion.
Examples for encoder connection, closed loop systems, and common functionalities.
How to order FC 360 series, using name plate and Drive Configurator.
List of available options and accessories for the FC 360.
Ordering numbers for 10% and 40% duty cycle brake resistors.
Information on Sine-wave filters for dampening acoustic motor noise.
Specifications related to power output, current, and mains supply.
Detailed electrical, mechanical, input/output, and environmental specifications.
Recommendations for fuses, circuit breakers, and CE compliance.
Details on efficiency, acoustic noise, and dU/dt conditions.
Manual and automatic derating based on special operating conditions.
To Next Page
General