Danfoss VLT series User Manual

2
7
U/T1 96
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
V/T2 97 W/T3 98 U/T1 96
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
V/T2 97 W/T3 98 U/T1 96
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
V/T2 97 W/T3 98
6
8, 9
4
3
1
5
130BA862.12
1 NAMUR fuse. See Table 3.25 for part numbers.
2 NAMUR terminals (optional)
3 External temperature monitoring
4 AUX relay (01, 02, 03, 04, 05, 06)
5 AUX fan (100, 101, 102, 103)
6 Motor connection, 1 per module T1 (U), T2 (V), T3 (W)
7 Brake 81 (-R), 82 (+R)
8 Fan fuses. See Table 3.22 for part numbers.
9 SMPS fuses. See Table 3.21 for part numbers.
Illustration 3.39 Inverter Cabinet, Enclosure Sizes F12 and F13
How to Install Operating Instructions
MG34Q402 Danfoss A/S © 04/2016 All rights reserved. 41
3 3

Danfoss VLT series Specifications

General

Series	VLT
Category	DC Drives
Output Voltage	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	Profibus, CANopen
Enclosure Rating	IP20, IP21, IP55, IP66
Cooling Method	Forced Air Cooling, Convection Cooling
Control Mode	Sensorless Vector, Closed Loop Vector
Ambient Temperature	-10°C to +50°C (14°F to 122°F)