Data Aire dap 4 - Page 58

58•dap4UserManual
The following will be displayed (values are for reference only):
Note: If (Enable) OFF is selected the High Res, Offset and Value will not be displayed.
With Enable ON, High Res., Offset and Value will be displayed and values changed.
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key
▼PresstheDOWNkeytoviewthenextscreen:
The following will be displayed (values are for reference only):
With Enable OFF
With Enable ON
Analog Input
Chilled Water Sensor
Enable: On Channel: B10
High Res. NTC
Offset: 0.0
Value: 74.1
Optional Sensor #1
Enable: OFF
Choose Name
Optional Sensor #1
Enable: OFF
Choose Name
Normal NTC
Offset 0.0
o
F
Value -2.1
o
F