DataCard CR500 Installation And Administrator's Guide

2 Introduction
Related Documentation
Refer to the following for more information about the CR500 card printer:
 CR500 Instant Issuance System Quick Install Guide provides installation instructions to quickly
set up the printer.
 Datacard CR500 Instant Issuance System User’s Guide contains general information about the
card printer, instructions for operating and maintaining the printer, and troubleshooting and
error recovery information.
 Datacard CR500 Instant Issuance System User Reference Guide provides easy access to
instructions for using and maintaining the CR500 card printer.
Intended Audience
This manual provides information for:
 The site manager responsible for setting up the CR500 printer and the system that uses the
printer.
 The technical professionals who set up and maintain card printing for issuance sites.
If You Need Assistance
If you work with an Entrust Datacard-authorized dealer, distributor, or value-added reseller,
contact them for assistance. A value-added reseller provides the CR500 card printer as part of an
overall system.
If any contents of the carton are missing, contact your Entrust Datacard-authorized dealer,
distributor, or reseller. If you purchased your printer directly from Entrust Datacard, contact the
Entrust Datacard Customer Care Center in your region:
Make sure that you have the printer serial number, located on the back of the printer, when you
call.
For Datacard® CardWizard® issuance software support, call 1-800-568-4598.
Americas +1 800.328.3996 or 952.988.2316
Europe, Middle East,
and Africa
+44 1489555627
Asia Pacific +852 2821 0121

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English