DataCard CR500 - Pick

CR500 Instant Issuance System Installation and Administrator’s Guide 67
Pick
The Pick settings control the pick motor and time frames for picking cards. These adjustments are
all related to feeding a card into the printer.
Option Description
ExceptionLinearOffset Sets the linear offset to pick a card from the exception card slide.
Range: –500 to 500 steps
Default: 0
ExceptionRotationOffset Sets the rotational movement offset to pick a card from the exception
card slide.
Range: –10 to 10 steps
Default: 0
Hopper1LinearOffset Sets the linear offset to pick a card from hopper 1.
Range: –500 to 500 steps
Default: 0
Hopper1RotationOffset Sets the rotational movement offset to pick a card from hopper 1.
Range: –10 to 10 steps
Default: 0
Hopper2LinearOffset Sets the linear offset to pick a card from hopper 2.
Range: –500 to 500 steps
Default: 0
Hopper2RotationOffset Sets the rotational movement offset to pick a card from hopper 2.
Range: –10 to 10 steps
Default: 0
Hopper3LinearOffset Sets the linear offset to pick a card from hopper 3.
Range: –500 to 500 steps
Default: 0
Hopper3RotationOffset Sets the rotational movement offset to pick a card from hopper 3.
Range: –10 to 10 steps
Default: 0