DataCard CR500 - Printer Configuration

28 Install the Printer
Printer Configuration
This section describes the tasks you need to perform to set up the printer in your network
environment. Some tasks must be directed by your network support personnel.
Perform these tasks in the order listed.
1. Activate the Printer on page 29
2. Set a Static Printer IP Address on page 33
Or
Retrieve the Printer IP Address on page 38
3. Set Up Network Access on page 40
4. Access Printer Manager on page 41
a. Print a Test Card on page 42
b. Additional Setup Tasks on page 44
5. Set Up CardWizard Issuance Software on page 45