66 Using Printer Manager
RetransferRollerTemp Increases or decreases the temperature of the retransfer roller.
Range: –2 to +2 special units
Default: 0 special units
Increase this setting if the retransfer results in concave cards.
Decrease the setting to reduce wrinkling of the retransfer film or to
prevent film breaks while retransferring the image to the card.
Determine the retransfer roller temperature to use based on the type
of card material and the retransfer velocity. (Retransfer velocity is a
WebService setting. Contact your service provider for assistance.) Print
sample cards to determine the appropriate settings for your card type.
YMCPower Changes the intensity of printing for the Y, M, and C ribbon panels. This
adjustment controls the overall lightness or darkness of the YMC
panels.
Range: –3 to +3 special units
Default: 0 special units
Increase the YMCPower to make color printing more intense.
Decrease the YMCPower to reduce intensity or to prevent ribbon
breaks while printing colors.
Option Description
To Next Page
Loading...
Need help?
General
