32 Install the Printer
8. Press ENTER (h) to submit the code.
If Request Success displays on line 2 of the touch screen the printer is activated.
If another message displays on line 2 of the touch screen, system activation failed.
Repeat step 7. If activation fails again, contact Entrust Datacard Technical Phone Support
at 1-800-328-3996.
9. Press the U
SER button (i) repeatedly until Ready displays on line 1 and the USER button glows
steady green.
The printer is ready for additional setup and to print cards. Continue with “Set or Retrieve the
Printer IP Address” on page 33.
To Next Page
Loading...
Need help?
General
