CR500 Instant Issuance System Installation and Administrator’s Guide 43
c. Pull out the exception card slide and place a plain white card (A) in the tray.
d. Push the slide all the way in (B), past any resistance, until it reaches the stop position.
5. In Printer Manager, scroll to the bottom of the screen and click Run.
6. The printer touch screen changes from Ready to Busy. The printer processes the card and
places the printed test card in the concealed output stacker.
You can print additional test cards by selecting different options in Printer Manager. Refer to
“Test Card” on page 71.
If a card does not print, and no messages display, contact your network support
personnel for assistance.
To Next Page
Loading...
Need help?
General
