DataCard SD260 - Install the Printer Driver

6 Installation
Install the Ribbon Cartridge
Installtheassembledprintribboncartridgeintotheprinter.
1. Opentheprintercover.
2. Holdtheprintribboncartridgebythehandleand
loweritintotheprinterwiththehandletowardthe
frontoftheprinter.
3. Makesurethattheribboncartridgeiscorrectly
positionedintheguides.
4. Closethe
printercover.Pressdownontheridgeson
thefrontofthecovertomakesurethatitlatches
completelyonbothsides.