DataCard SD260 - Communication

SD160/SD260 Card Printers Installation and Administrator’s Guide 39
Communication
TheCommunicationsettingschangetheEthernetaddressmethodfromDHCPtoSTATIC.Ifsetto
STATIC,entertheIP address,subnetmask,andgatewayaddressmanuallytomatchthesettingsof
thenetwork.
 EthAddressMethod—ThemethodusedtoobtaintheEthernetnetworkIPaddress.Select
DHCPorSTATICfromtheCurrentValuedrop‐downlist.
 WhenthevalueisDHCP,theEthGatewayAddress,EthIpAddress,andEthSubnetMask
valuesarefilledinautomatically.
 WhenthevalueisSTATIC,theEthGatewayAddress,EthIPAddress,andEthSubnetMask
valuesmustbesetmanually.
 EthGatewayAddress—EnterthegatewayaddressfortheEthernetnetwork.
 EthIpAddress—EnterthestaticIPaddressfortheprinter.
 EthSubnetMask—EnterthesubnetmaskfortheEthernetnetwork.
1. ClickSetCurrenttoapplythechanges.
2. LogoutofPrinterManager,andthenrestartitforthechangestotakeeff ect.
Description DefaultValue CurrentValue(unit)
1)EthAddressMethod DHCP DHCP
2)EthGatewayAddress 0.0.0.0 0.0.0.0
3)EthIpAddress 0.0.0.0 0.0.0.0
4)EthSubnetMask 0.0.0.0 0.0.0.0