DataCard SD260 - Prepare the Printer to Use Rewritable Cards

SD160/SD260 Installation and Administrator’s Guide 7
Prepare the Printer to Use Rewritable Cards
1. Opentheprintercoverandremovetheprintribboncartridge.
2. Removetheprintribbonfromthecartridgeandsetitaside.
3. Makesurethatthecleaningrollerwiththereplaceablecleaningsleeveisinstalled.
4. Returntheprintribboncartridgetotheprinter.
5. Closetheprintercover.Pressdownonthe
ridgesonthefrontofthecovertomakesurethat
itlatchescompletelyonbothsides.
6. Haverewritablecardsavailabletoinsertintotheprinter.
Toprintrewritablecards,youalsomustdothefollowing:
 EnablerewritableprintinginPrinterManager.
Usetherewritablecardsettingstoenabletherewriteoptionandspecifythevaluestouse.
Referto“Print”onpage 44forcompleteinformationaboutthePrinterManagersettings.
 SpecifyrewritablecardsettingsintheCardPrinterDriver.
ForcompleteinformationaboutsettinguptheCardPrinterDrivertoprintrewritablecards,
refertoyourprinter’sDriverGuide.
Whenyouprintrewritablecards,insertthecardsoneatatime.Makesurethatthe
cardisengagedinthepickrollers.Theerase/rewriteprocesscancausethecardsto
bendslightly,whichmaypreventthemfrombeingpickedfromtheinputhopper.