DataCard SD260 - Chapter 5: Using the Printer; Use the Front Panel

SD160/SD260 Card Printers Installation and Administrator’s Guide 55
Usingcustommagneticstripedataformatsisatwo‐stepprocess.First,definethecustomtracks
usingMagStripeCustomTrack1,MagStripeCustomTrack2,andMagStripeCustomTrack3.Second,
applythecustomtrackusingthesettingsontheMagStripeGeneralmenu.
1. Tousethedefinedcustomtrack:
a. OpentheMagStripeGeneralmenu.
b. SelectCustomforDataFormat1,DataFormat2
,orDataFormat3tousethecustomtrack.
 MagStripeCustomTrack1correspondstoDataFormat1
 MagStripeCustomTrack2correspondstoDataFormat2
 MagStripeCustomTrack3correspondstoDataFormat3
2. ClickSetCurrenttoapplythechanges.