DataCard SD460 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 59
 KPower—Modify the print intensity for K (single-color) panel or K (single-color) ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPower1200DPI—Modify the print intensity at 1200 dpi for the K panel or K ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPower600DPI—Modify the print intensity at 600 dpi for the K panel or K ribbon.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KPowerDuplex—Modify the print intensity for the back-side K panel and K ribbons.
 Increase the value to make single-color printing thicker and more defined on the card.
 Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
 KWhiteShade—Modify the amount of power applied to the printhead to reduce ribbon
friction without transferring material. Decrease the value if material transfers to the card
when it should not.
 LeadTrim—Modify the number of millimeters to remove from the leading edge of a full-size
image to keep it within the print area (1 mm = 0.0394 in. or about 11.8 dot rows).
 SettingsGroupPurpose—State the purpose of a settings group. Group names are not
changeable. Use this option to identify the reason for creating a settings group.
 TPower—Modify the intensity of the T (topcoat) ribbon panel.
 Increase the value to make printed topcoat thicker or more uniform.
 Decrease the value to prevent frequent ribbon breaks while printing the topcoat.
 TPowerDuplex—Modify the intensity of the back-side T (topcoat) ribbon panel.
 Increase the value to make printed topcoat thicker or more uniform.
 Decrease the value to prevent ribbon breaks while printing the topcoat.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm