Elrepho 3000
The rightmost soft key will be labeled to indicate that if you press
it, you will save the password. Once pressed, the “verification”
password is checked to see whether it matches the “setup”
password. A message is briefly displayed to indicate whether they
match. If they match, you will automatically exit the mode. If they
do not match, or if the MENU at any time, control is returned back
to the Password Setup Mode.
Appendix B: Password Protection
Password Verification Mode
If password protection is enabled, this mode will require that you
enter the password before allowing access to the Setup Mode. When
this mode is entered, a message will be displayed informing the user
that the selected option is password protected. The rightmost soft
key label will indicate that pressing the key will check the
password.
If the password is correct, you can enter the Setup Mode. If it is not
correct, an error message is displayed and entry into the Setup
Mode is denied.
Datacolor International
67
To Next Page
Loading...
