Datakom DKM-411 - Topologies Overview

To Next Page

To Previous Page

DKM-411 User Manual Rev_01 Firmware V-1.0

K46D03-EN - 30 -

Various topologies are selectable through program parameter.

In following drawings the connections are shown for the alternator. Current transformers are supposed

connected to the alternator side.

Similar topologies re available for the mains side as well.

4.1. SELECTING THE TOPOLOGY

4. TOPOLOGIES

Generator

Parameters

Topology

Selection

Topology

Selection

Mains

Parameters

Main Page

Default Chapter6
- Table of Contents6
1 Installation Instructions8
2 Mounting9
- Dimensions9
- Sealing, Gasket12
- Electrical Installation13
3 Terminal Descriptions14
- Auxiliary Supply Input14
- Ac Voltage Inputs15
- Ac Current Inputs16
- Digital Inputs20
- Digital Outputs21
- Rs-485 Port22
- Ethernet Port24
- Usb Device Port25
- Usb Host Port26
- Modem Port27
- External Gsm Modem (Dkg-090)28
4 Topologies30
- Selecting the Topology30
- Phase, 4 Wire, Star31
- Phase, 3 Wire, Delta31
- Phase, 4 Wire, Delta32
- Phase, 3 Wire, Delta, 2 Ct (L1-L2)32
- Phase, 3 Wire, Delta, 2 Ct (L1-L3)33
- PHASE, 3 WIRE, DELTA, 2 Cts (L1-L2)33
- Phase, 2 Wire34
5 Connection Diagram35
6 Terminal Description36
7 Technical Specifications37
8 Description of Controls38
- Front Panel Functionality38
- Pushbutton Functions39
- Display Screen Organization40
- Measured Parameters42
9 Waveform Display & Harmonic Analysis43
10 Phasor Diagram45
11 Analog Displays46
12 Comparing Measurements46
13 User Configurable Display Screens47
14 Power Counters & Incremental Counters48
15 Demand Values49
16 Min-Max Values49
17 Displaying Event Logs50
18 Protections and Alarms52
19 Programming53
- Entering the Programming Mode53
- Navigating between Menus54
- Modifying Parameter Value56
- Programming Mode Exit57
- Resetting to Factory Set Parameters58
20 Program Parameter List59
- Controller Configuration Group59
- Electrical Parameters Group61
- Counters Min/Max Parameters Group64
- Digital Input Configuration65
- Output Configuration67
- User Input Strings68
- Configuring User Display Screens69
- Site-ID String71
- Device Serial Number71
- Sms1-2-3-4 Telephone Numbers71
- Adjust Date and Time71
- Gsm Modem Parameters72
- Ethernet Parameters73
21 Ethernet Configuration75
22 Gsm Configuration75
23 Dynamic Dns Feature75
24 Accessing the Embedded Web Server76
25 Web Monitoring78
26 Central Monitoring78
27 E-Mail Sending78
28 Ethernet/Gprs - Modbus Gateway Operation78
29 Sms Commands79
30 Data Recording80
- Data Recording Media80
- Directory Structure81
- Understanding the Csv Format81
- Recorded Data List, Record Period82
31 Modbus Communications83
- Parameters Required for Rs-485 Modbus Operation84
- Parameters Required for Modbus-Tcp/Ip Via Ethernet84
- Data Formats84
32 Snmp Communications86
- Parameters Required for Snmp Via Ethernet86
33 Calibration87
34 Declaration of Conformity88
35 Maintenance88
36 Disposal of the Unit89
37 Rohs Compliance89
38 Troubleshooting Guide90

Datakom DKM-411 - Topologies Overview

Table of Contents

Other manuals for Datakom DKM-411