DKM-411 User Manual Rev_01 Firmware V-1.0
K46D03-EN - 71 -
The site identity string is designed to identify the current device.
This is the site Id string sent at the beginning of SMS messages, e-mails and web page headers for the
identification of the device sending the message. Any 20 character string may be entered.
The engine serial number string is designed to identify the current device.
The string is added to GSM-SMS messages, e-mails, web page headers etc.
These telephone number buffers accept up to 16 digits.
These parameters allow adjustment of the battery
backup real time clock of the module.
Once set, the clock will continue to run for years
even if the power is removed from the unit.
The button will switch to the next
parameter and adjust with and
buttons.
Current day of the month.
Last two digits of the current year.
Current minute of the hour.
saved with long-press
on button.
20.11. ADJUST DATE AND TIME
Enter numbers starting from first character. Do not
leave blank characters at the beginning.
20.10. SMS1-2-3-4 TELEPHONE NUMBERS
20.9. DEVICE SERIAL NUMBER
To Next Page
Loading...
Need help?
General
