Datalogic Gryphon I GBT4400 2D User Manual

LED and Beeper Indications
Quick Reference Guide 43
Green Spot
a
flashes
momentarily
Upon successful read
of a label, the soft-
ware shall turn the
green spot on for the
time specified by the
configured value.
N/A N/A
Image Cap-
ture
When ready to cap-
ture image
Blue light flashes
2 times when
updating
N/A
a
Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Indication Description LED Beeper

Datalogic Gryphon I GBT4400 2D Specifications

General

Scanner Type	2D Imager
Connectivity	Bluetooth
IP Rating	IP52
Print Contrast Ratio (Minimum)	25%
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Drop Resistance	1.8 m (6 ft) to concrete
Weight	245 g / 8.64 oz
Dimensions	18.1 x 7.1 x 10.0 cm / 7.1 x 2.8 x 3.9 in
Light Source	Red LED
Image Sensor	CMOS
Decode Capability	1D / 2D / Postal / Stacked codes
Scanning Technology	Imaging
Resolution	752 x 480 pixels
Skew Angle	+/- 65°
Humidity	5 to 95% non-condensing
Drop Specification	1.8 m (6 ft) to concrete
Power Supply	5 VDC +/- 5%
Beeper	Yes
Indicators	LEDs, Beeper
Supported Barcodes	All standard 1D and 2D barcodes