Datalogic Gryphon I GD4400

1D Code Selection Enter/Exit Programming Mode
Product Reference Guide 143
Optional GS1-128 Add-On Timer
This option sets the timer expiration value to read the added part after
reading the linear EAN/UPC part. For UPC/EAN add-ons other than those of
that type, see "Optional Add-On Timer" on
page 140.
DEFAULT
$CADUT00(CR)
Optional GS1-128 Add-On Timer = Disable
$CADUT01(CR)
Optional GS1-128 Add-On Timer = 10ms
$CADUT02(CR)
Optional GS1-128 Add-On Timer = 20ms
$CADUT03(CR)
Optional GS1-128 Add-On Timer = 30ms
$CADUT04(CR)
Optional GS1-128 Add-On Timer = 40ms
$CADUT05(CR)
Optional GS1-128 Add-On Timer = 50ms