Datalogic Gryphon I GD4400 - Code Iata; IATA Check Character Transmission; IATA Enable;Disable

Enter/Exit Programming Mode1D Code Selection
180 Gryphon™ I GD44XX/GBT4400/GM440X
CODE IATA
The following options apply to the IATA symbology.
IATA Enable/Disable
Enables/Disables the ability of the reader to decode IATA labels.
DEFAULT
$CIAEN00(CR)
IATA = Disable
$CIAEN01(CR)
IATA = Enable
IATA Check Character Transmission
Enables/Disables calculation and verification of an optional Industrial 2 of 5
check character.
$CIACT00(CR)
IATA Check Character Transmission = Disable
$CIACT01(CR)
IATA Check Character Transmission = Enable
DEFAULT