Datalogic Gryphon I GD4400

Enter/Exit Programming Mode
Product Reference Guide 91
Set AIM ID Individually for GS1-128
This feature configures a Label ID individually for the GS1-128 symbology and
the programming for this works the same way as Label ID. See Label ID: Set
Individually Per
Symbology, starting on page 290 for detailed instructions on
setting this feature.
$CU8AI00(CR)
Set AIM ID Individually for GS1-128 = Disable
$CU8AI01(CR)
Set AIM ID Individually for GS1-128 = Enable
DEFAULT