Datalogic Gryphon I GD4400 - Code 128 Quiet Zones; Code 128 Sub-Code Exchange Transmission

Enter/Exit Programming Mode1D Code Selection
158 Gryphon™ I GD44XX/GBT4400/GM440X
Code 128 Sub-Code Exchange Transmission
Enables/disables the transmission of “Sub-Code Exchange” characters (NOT
transmitted by standard decoding).
DEFAULT
$CC8SC00(CR)
Code 128 Sub-Code Exchange Transmission = Disable
$CC8SC01(CR)
Code 128 Sub-Code Exchange Transmission = Enable
Code 128 Quiet Zones
This feature specifies the number of quiet zones for Code 128 labels. Quiet
zones are blank areas at the ends of a bar code and are typically 10 times
the width of the narrowest bar or space in the label.
$CC8LO02(CR)
Code 128 Quiet Zones = Quiet Zones on two sides
$CC8LO03(CR)
Code 128 Quiet Zones = Small Quiet Zones on two sides
DEFAULT