To Next Page

To Previous Page

MATRIX 400™ CODE QUALITY VERIFIER SOLUTION

5.4.2 ISO/IEC 15416 Verification Setup

Allows to configure lighting and camera settings to comply with ISO/IEC 15416 optical

requirements for 1D symbol verification.

ISO-IEC 15415-15416 SETUP

Aperture Mode

Allows configuration of the Aperture parameter according to the

ISO-IEC 15415 and ISO-IEC

15416

international standards. The possible selections are:

• Automatic: the physical size of the virtual aperture applied to the captured symbol image

is automatically calculated by the verification software.

• Custom: allows specifying the physical size of the virtual aperture applied to the captured

symbol image.

Aperture (mils)

Sets the physical size of the virtual aperture applied to the captured symbol image by the

verification software.

Angle

Sets the incidence angle at which the symbol is illuminated by the lighting system during the

verification process.

Light Wavelength (nm)

Sets the wavelength in nanometres of the LED illumination directed at the symbol during the

verification process. The possible selections are:

• White

• 660

• 760

ISO-IEC 15416

Status

Enables/disables symbol verification according to the ISO-IEC 15416 international standard

for Code 128, Code 39, Interleaved 2 of 5, Codabar, Code 93, EAN-8/EAN-13, UPC-A/UPC-

E symbologies.

Grade Type

Allows selecting the appearance of the ISO-IEC 15416 verification output. The possible

selections are:

• 10 Scans: supplies Scan Reflectance Profile Grades for each quality parameter on each

of 10 code scans.

• Media: supplies the mathematical average Scan Reflectance Profile Grade for each

quality parameter over 10 code scans.

• Media & 10 Scans: supplies Scan Reflectance Profile Grades for each quality parameter

on each of 10 code scans plus the mathematical average.

Datalogic Matrix 400 User Manual

Other manuals for Datalogic Matrix 400