Datalogic Matrix 400 User Manual

SOFTWARE CONFIGURATION
46
5.4.3 AS9132A Verification Setup
Allows to configure camera settings to comply with AS9132A requirements for 2D symbol
verification.
AS9132A
Status
Enables/disables symbol verification according to the
AS9132A standard for direct part mark
DataMatrix ECC200 symbology.
Module Shape
Allows specifying the module shape of the code to be verified (circular or square). This option
affects the symbol verification results according to the AS9132A standard.
The possible selections are:
• Dot : Circular modules.
• Square: Quadrate modules.
Marking Method
Allows specifying the method used to create the symbol to be verified. This option affects the
symbol verification results according to the AS9132A standard.
The possible selections are:
• Ink Jet / Dot Peening: the symbols are created by the injection of electrically charged ink
or using a percussive marking method to create contrast between light and dark modules.
• Laser Etching / Chemical Etching: the symbols are created using a laser (i.e. YAG, YVO4
or CO2) on a variety of metal substrates or using an electro-chemical process on
conductive metal substrates.
61

Datalogic Matrix 400 Specifications

General

Brand	Datalogic
Model	Matrix 400
Category	Laboratory Equipment
Language	English