SAFETY REGULATIONS
Read this manual carefully before performing any type of connection
to the Datalogic Memor mobile computer.
The user is responsible for any damage caused by incorrect use of
the equipment or by inobservance of the indication supplied in this
manual.
NOTE
GENERAL SAFETY RULES
− Use only the components supplied by the manufacturer for the specific
Datalogic Memor being used.
− Do not attempt to disassemble the Datalogic Memor mobile computer, as it does
not contain parts that can be repaired by the user. Any tampering will invalidate
the warranty.
− When replacing the battery pack or at the end of the operative life of the
Datalogic Memor mobile computer, disposal must be performed in compliance
with the laws in force in your jurisdiction.
− Before using the devices and the battery packs, read chap. 2.
− Do not submerge the Datalogic Memor in liquid products.
− For further information, refer to this manual and to the Datalogic web site:
www.datalogic.com.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which
supplies power directly to the Datalogic Memor or else be supplied by a UL
Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5 V,
3.0 A, which supplies power directly to the Datalogic Memor via the power connector
of the cable.
The package includes three international plug adapters. The adapters must be
plugged in the power supply before the power supply itself is plugged on the wall
outlet.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
