Datalogic Memor User Manual

1 DATALOGIC MEMOR™
42
4
4.4 STATUS INDICATORS
4.4.1 LED Status
The Datalogic Memor provides two different LEDs signaling the mobile computer
status.
LED STATUS
Good Read and
General Purpose
(left side)
Green
It is constant for a configurable time to
signal that a successful read has
occurred.
Green/ Red
It is also available to the application
program.
Charging Status
(right side)
Green
It is solid once the charging process has
been completed (full charge).
Red It is solid while charging.
Off
if the charging stops due to high
temperature, failures etc.
Orange it is constant while in pre-charge status

Datalogic Memor Specifications

General

Scan speed	104 sec/page
Wavelength	630 nm
Sensor type	Laser
Decoding standards	UPC A, UPC E, EAN 8, EAN 13, Code 39, Code 39 Full ASCII, Code 32, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Code 128, EAN 128, Codabar, MSI, Plessey, Code 93, Code 11, GS1 Databar.
Product color	Black
Internal memory	256 MB
Built-in processor	PXA310
Display resolution	240 x 320 pixels
Processor frequency	624 MHz
Bluetooth	Yes
Standard interfaces	USB, RS-232
Battery type	Li-polymer/Li-ion
Input voltage	5 V
Power consumption	1100 mA
Safety	Class 2
Display	Reflective TFT 64K
Dimensions (WxDxH)	152 x 55 x 40 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Weight	230 g