EasyManuals Logo

Datalogic Memor User Manual

Datalogic Memor
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
108
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your mobile computer.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040
Subchapter J and EN 60825-1:2007 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
Do not attempt to open or otherwise service any components in the
optics cavity. Opening or servicing any part of the optics cavity by
unauthorized personnel may violate laser safety regulations. The
optics system is a factory only repair item.
CAUTION
Use of controls or adjustments or performance of procedures other
than those specified herein may result in exposure to hazardous
visible laser light.
CAUTION
The product utilizes a low-power laser diode. Although staring directly at the laser
beam momentarily causes no known biological damage, avoid staring at the beam as
one would with any very strong light source, such as the sun. Avoid shining laser light
into any person's eye, even through reflective surfaces such as mirrors, etc.
Use of optical systems with the scanner will increase eye hazard.
Optical instruments include binoculars, microscopes, eye glasses and
magnifying glasses.
CAUTION
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e
si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 sezione J e EN 60825-1:2007.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione, utilizzo o
manutenzione.

Table of Contents

Other manuals for Datalogic Memor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Memor and is the answer not in the manual?

Datalogic Memor Specifications

General IconGeneral
Scan speed104 sec/page
Wavelength630 nm
Sensor typeLaser
Decoding standardsUPC A, UPC E, EAN 8, EAN 13, Code 39, Code 39 Full ASCII, Code 32, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Code 128, EAN 128, Codabar, MSI, Plessey, Code 93, Code 11, GS1 Databar.
Product colorBlack
Internal memory256 MB
Built-in processorPXA310
Display resolution240 x 320 pixels
Processor frequency624 MHz
BluetoothYes
Standard interfacesUSB, RS-232
Battery typeLi-polymer/Li-ion
Input voltage5 V
Power consumption1100 mA
SafetyClass 2
DisplayReflective TFT 64K
Dimensions (WxDxH)152 x 55 x 40 mm
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 50 °C
Weight and Dimensions IconWeight and Dimensions
Weight230 g

Related product manuals