Datalogic Memor User Manual

BATTERIES AND MAINTENANCE
15
2
In order to maximize operating autonomy, the Datalogic Memor
checks its battery level at all times. If the battery is not
sufficiently charged, the Datalogic Memor will not turn on when
the ON/OFF Power button is pressed.
In this case, either substitute a sufficiently charged battery, insert
the Datalogic Memor into a powered cradle, or plug it into a wall
charger.
NOTE
To maximize battery life, turn off radios when they are not
needed.
NOTE

Datalogic Memor Specifications

General

Scan speed	104 sec/page
Wavelength	630 nm
Sensor type	Laser
Decoding standards	UPC A, UPC E, EAN 8, EAN 13, Code 39, Code 39 Full ASCII, Code 32, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Code 128, EAN 128, Codabar, MSI, Plessey, Code 93, Code 11, GS1 Databar.
Product color	Black
Internal memory	256 MB
Built-in processor	PXA310
Display resolution	240 x 320 pixels
Processor frequency	624 MHz
Bluetooth	Yes
Standard interfaces	USB, RS-232
Battery type	Li-polymer/Li-ion
Input voltage	5 V
Power consumption	1100 mA
Safety	Class 2
Display	Reflective TFT 64K
Dimensions (WxDxH)	152 x 55 x 40 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Weight	230 g