Enter/Exit Programming Mode
166
PowerScan™ PD9530/PBT9500/PM9500
MSI Set Length 1
This feature specifies one of the bar code lengths for MSI Length Control.
Length 1 is the minimum label length if in
Variable Length Mode, or the first
fixed length if in
Fixed Length Mode. Length includes the bar code’s data
c
haracters only. The length can be set from
01 to 50 characters.
Table 22 provides some examples for setting Length 1. See page 267 for
detailed instructions on setting this feature.
Table 22. MSI Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
To Next Page
Loading...
Need help?
General
