2D Global Features Enter/Exit Programming Mode
Product Reference Guide
185
Data Matrix Set Length 2
This feature specifies one of the bar code lengths for Data Matrix Length
Control
. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Length Mode. Characters can be s
et
from 0001 to 3,116 characters in increments of 0001 (pad with zeroes).
See
page 268 for detailed instructions on setting this feature.
Select Data Matrix Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the ENTER/EXIT bar
code again.
Make a mistake? Scan the CANCEL bar code to abort
and not
sav
e the entry string. You can then start
again at the beginning.
Length 2 is 3,116 Characters
To Next Page
Loading...
