Datalogic PowerScan 9500 Series User Manual

Enter/Exit Programming Mode
228 PowerScan™ PD9530/PBT9500/PM9500
Bluetooth HID Variable PIN Code
Specifies the selection available for Static or Variable Pin Code, when Blue-
tooth HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
require a Variable PIN Code. When attempting connection, the application
presents a window that includes a PIN Code which is to be input using the
PowerScan BT9500. Scan the bar code "Variable PIN Code" below, then use
the host computer’s Bluetooth manager to “Discover new devices” and select
"Datalogic Scanner." Use a text editor to see incoming data on the port des-
ignated by the computer's Bluetooth manager.
If you receive an error message, it may be necessary to disable
security on the device.
When you hear the beep and see the Green LED blinking indicating the
reader is waiting for an alphanumeric entry, enter the required variable PIN
Code by scanning the corresponding bar codes in
Appendix D, Keypad for
alphanumeric entry. Finish by scanning th
e Exit HID Va
riable PIN Code label.
$CBTHP00
Set Static Pin Code
DEFAULTDEFAULT
$CBTHP01
Set Variable Pin code
~
CANCEL
Make a mistake? Scan the CANCEL bar code to abort
and
not save the entry string. You can then start
again at the beginning.
Exit HID Variable PIN Code

Datalogic PowerScan 9500 Series Specifications

General

Brand	Datalogic
Model	PowerScan 9500 Series
Category	Barcode Reader
Language	English