2D Global Features Enter/Exit Programming Mode
Product Reference Guide
181
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code
Length Control
. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length if in Fixed Length Mode. Char
acters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See
page 268 for detailed instructions on setting this feature.
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the ENTER
/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o
abort
and not save the entry string. You can then start
again at the beginning.
Length 2 is 7,827 Characters
To Next Page
Loading...
Need help?
General
