Datalogic QuickScan I QM21X1 User Manual

Enter/Exit Programming Mode Code 39
142 QuickScan™ I QM21X1 / QBT21X1
Code 39 Set Length 2
This feature specifies one of the bar code lengths for Code 39 Length Control
on page 140. Length 2 is the maximum label length if in Variable Length on
page 140 Mode, or the second fixed length if in Fixed Length on page 140
Mode. Length includes the bar code’s check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 305 for
more detailed programming instructions.
$CC3L2
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters

Datalogic QuickScan I QM21X1 Specifications

General

Brand	Datalogic
Model	QuickScan I QM21X1
Category	Barcode Reader
Language	English