Datalogic QuickScan I QM21X1 - I 2 of 5 Decoding Level

Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)
162 QuickScan™ I QM21X1 / QBT21X1
I 2 of 5 Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very
aggressive to very conservative depending on a particular customer’s needs.
See "Decoding Levels" on page 303 for more detailed programming instruc-
tions.
NOTE
This configuration item applies to Interleaved 2 of 5, Datalogic 2 of 5 and Standard 2 of 5.
$CI2DL00
2 of 5 Decoding Level = Disable
$CI2DL01
2 of 5 Decoding Level = 1
$CI2DL02
2 of 5 Decoding Level = 2
$CI2DL03
2 of 5 Decoding Level = 3
$CI2DL04
2 of 5 Decoding Level = 4
$CI2DL05
2 of 5 Decoding Level = 5
DEFAULT