Enter/Exit Programming Mode
258 QuickScan™ I QM21X1 / QBT21X1
Beep Volume
Selects the beeper volume (loudness) of radio-specific beep indications. There
are three selectable volume levels.
Disconnect Beep
Enables/disables the beep indication that a handheld has become connected or
disconnected from a Base Station.
Beep Volume = Low
Beep Volume = Medium
Beep Volume = High
DEFAULT
NOTE
The defaults are different for the STAR and BT models.
STAR default
Disconnect Beep = Disable
Disconnect Beep = Enable
BT default
DEFAULT
To Next Page
Loading...
