Datalogic QuickScan I QM21X1 User Manual

Enter/Exit Programming Mode
262 QuickScan™ I QM21X1 / QBT21X1
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base
Station. Use this method when the Auto Configuration Update feature is dis-
abled and you want a one-time configuration update to be performed on the
Base Station.
BATCH FEATURES
Batch Mode
This option specifies whether to store labels in the handheld while discon-
nected from the base. Options are as follows:
• Disabled — The handheld will not store/batch labels.
• Automatic — The handheld will store labels to RAM when the handheld
goes out of range and is disconnected from the remote device.
• Manual — The handheld will always store labels to Flash memory. The user
must manually send the stored labels to the remote device using a special
"batch send" label.
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
Copy Configuration to Base Station
Batch Mode = Disabled
Batch Mode = Automatic
Batch Mode = Manual
DEFAULT

Datalogic QuickScan I QM21X1 Specifications

General

Brand	Datalogic
Model	QuickScan I QM21X1
Category	Barcode Reader
Language	English