Enter/Exit Programming Mode Datalogic 2 of 5
172 QuickScan™ I QM21X1 / QBT21X1
Datalogic 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Datalogic 2 of 5 Length
Control on page 170. Length 2 is the maximum label length if in Variable
Length on page 163 Mode, or the second fixed length if in Fixed Length on
page 163 Mode. The length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 305 for
more detailed programming instructions.
$CD2L2
Select Datalogic 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
