Enter/Exit Programming Mode Wedge Quiet Interval
48 QuickScan™ I QM21X1 / QBT21X1
Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before
the reader breaks the keyboard connection in order to transmit data to host.
The selectable range for this feature is from 0 to 990ms in 10ms increments.
See "Wedge Quiet Interval" on page 285 for more detailed programming instruc-
tions.
NOTE
This feature applies ONLY to the Keyboard Wedge interface.
$CKBQI
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
OA = Quiet Interval of 100 ms
To Next Page
Loading...
Need help?
General
