Reading Parameters Enter/Exit Programming Mode
Product Reference Guide
81
Stand Mode Triggered Timeout
This feature specifies the time to remain in Trigger Single on page 299 mode
after the trigger is pulled while in Autosense® Stand Mode on page 299.
NOTE
This timeout is only used when the Scan Mode is configured as
Auto-
sense® Stand Mode on page 299
.
$CSNOT01
Stand Mode Triggered Timeout = 0.5 Seconds
$CSNOT03
Stand Mode Triggered Timeout = 1.5 Seconds
$CSNOT04
Stand Mode Triggered Timeout = 2 Seconds
$CSNOT06
Stand Mode Triggered Timeout = 3 Seconds
$CSNOT08
Stand Mode Triggered Timeout = 4 Seconds
To Next Page
Loading...
Need help?
General
