RS-232/USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide
37
ACK NAK Retry Count
This feature specifies the number of times the reader retries a label transmis-
sion due to a retry condition. The selectable range is from 1 to 254 retries. A
selection of 0 disables the count, and a selection of 255 specifies unlimited
retries. See "ACK NAK Retry Count" on page 282 for more detailed program-
ming instructions.
$CR2AR
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
To Next Page
Loading...
Need help?
General
