Datalogic QuickScan I QM21X1 - Industrial 2 of 5 Check Character Transmission; Industrial 2 of 5 Length Control

Enter/Exit Programming Mode Industrial 2 of 5
208 QuickScan™ I QM21X1 / QBT21X1
Industrial 2 of 5 Check Character Transmission
Enables/disables transmission of an Industrial 2 of 5 check character.
Industrial 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Industrial 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
$CU2CT00
Industrial 2 of 5 Check Character Transmission = Disable
$CU2CT01
Industrial 2 of 5 Check Character Transmission = Enable
DEFAULT
$CU2LC00
Industrial 2 of 5 Length Control = Variable Length
$CU2LC01
Industrial 2 of 5 = Fixed Length
DEFAULT