Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)
164 QuickScan™ I QM21X1 / QBT21X1
I 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for I 2 of 5 Length Control on
page 163. Length 1 is the minimum label length if in Variable Length Mode, or
the first fixed length if in Fixed Length Mode. The length includes the bar
code’s check and data characters.
The length can be set from 2 to 50 characters in increments of two. See "Set
Length 1" on page 304 for more detailed programming instructions.
$CI2L1
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
06 = Length 1 is 6 Characters
To Next Page
Loading...
Need help?
General
