Enter/Exit Programming Mode BC412
244 QuickScan™ I QM21X1 / QBT21X1
BC412 Set Length 1
This feature specifies one of the bar code lengths for BC412 Length Control on
page 243. Length 1 is the minimum label length if in Variable Length on page
243 Mode, or the first fixed length if in Fixed Length on page 243 Mode. Length
includes the bar code’s data characters only.
The length can be set from 01 to 50 characters. See "Set Length 1" on page 304
for more detailed programming instructions.
$CBCL1
Select BC412 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character
To Next Page
Loading...
Need help?
General
