Extended System-Level Command Functions
Class Series Programmer’s Manual 71
(LE) Legacy Emulation – This command enables the <STX>O and <STX>f print positioning
commands to allow backward compatibility with label formats that were designed for the
Allegro
®
Prodigy
®
, and Prodigy Plus
®
(If the printer is display-equipped, also Prodigy Max
®
emulation).
(LR) Label Rotation – This command sets label rotation, allowing formats to be flipped 180
degrees.
(LS) Language Select – This command selects the language for the menu system messages and
configuration label. Only languages that are resident will be available.
(LM) Label Store – This command selects the level of stored format recall to include the label-
formatting command fields, or the label-formatting command fields and the printer state.
(LW) Label Width – This command sets the maximum limit for the printable width. Objects
extending beyond this limit will NOT print; see Appendix K. (For non-display models also see
the <STX>KW command.)
Note: The EX2 requires this command prior to the start of a label format command (<STX>L).
To Next Page
Loading...
