Technical Manual
76
Every cone is factory calibrated prior to despatch, and is supplied with a cone
calibration certificate. The calibration data is stored in the cone’s memory.
Specification
For the latest cone specification please refer to applicable cone datasheet
available from www.datem.co.uk
Assembly
Exploded views of the 5cm
2
and 10cm
2
cones are illustrated below. These
drawings provide a representation of the main parts that make up the
assembly, and the way in which they fit together. The assembly drawing
illustrates the only parts of the cone that are field serviceable. Although some
degree of more extensive servicing is possible on cones sustaining field
damage, it’s recommended to return the cone to the Datem Cone servicing
facilities. When ordering any replacement parts, please quote the item
numbers and description below.
To Next Page
Loading...