Assembly
WARNING:
The compensator assembly is not generally considered to be a user
serviceable item. If the unit is to be disassembled, care must be taken due to
the spring-loaded nature of operation. The system is also pressurised
containing oil, hence removal of any fittings on the compensator or motor
without following the correct depressurisation procedure will result in rapid
release of high-pressure liquid. It is highly recommended to wear personal
protective equipment during work on the compensator and motor, in particular
overalls and safety glasses. Appropriate precautions should be taken to avoid
all contact with the oil in the pressurised system.
Depressurisation
It is highly recommended to wear personal protective equipment during the
depressurisation process, in particular overalls and safety glasses. Appropriate
precautions should be taken to avoid all contact with the oil in the pressurised
system.
To Next Page
Loading...